Please see the URL below. With best wishes John Woodgate 3 Bramfield Road East, RAYLEIGH Essex SS6 8RG UK OOO - Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Beware averages! They hide or discard data, and may distort it (them?). From: John Woodgate [mailto:jmw1...@btinternet.com] Sent: Friday, September 1, 2017 2:12 PM To: 'Kim Boll Jensen' <k...@bolls.dk> Subject: RE: [PSES] God EMC practice Go to: http://www.jmwa.demon.co.uk/Illustrations%20of%2080-80%20rule.pdf This is a presentation delivered by an expert on the subject to a CENELEC committee. With best wishes John Woodgate 3 Bramfield Road East, RAYLEIGH Essex SS6 8RG UK OOO - Own Opinions Only <http://www.jmwa.demon.co.uk/> www.jmwa.demon.co.uk J M Woodgate and Associates Beware averages! They hide or discard data, and may distort it (them?). From: Kim Boll Jensen [mailto:k...@bolls.dk] Sent: Friday, September 1, 2017 2:01 PM To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] God EMC practice Hi One of our customers want to know if there are some good practice for emission compliance. I normally recommend 3 dB margin, but I don't have any reference to why this is OK. I know that some companies have internal rules for 3 or even 6 dB margin to compensate for production deviations and for many years ago VDE did have some rules like that. Does anyone have some good references on this subject? Best regards, Mr. Kim Boll Jensen - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> >
- ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>