Hello Amund, Correct. If you apply to a Notified Body under Annex III (Module B) and get an EU-Type Examination Certificate, you do not put their Notified Body number on the product. (It would give the false impression that you had used Annex IV (Module H).
If you apply to a Notified Body under Annex III (Module B) and get an EU-Type Examination Certificate, you list the Notified Body and their number on your Declaration of Conformity (DoC). Thanks, Michael. Michael Derby Senior Regulatory Engineer Director ACB Europe Certification Resource for the Wireless Industry Web: www.acbcert.com e-mail: micha...@acbcert.com Mobile phone: (+44) 7939 880829 (UK area code) Corporate office phone: USA: (+1) 703 847 4700 -----Original Message----- From: Amund Westin [mailto:am...@westin-emission.no] Sent: 13 March 2018 10:00 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Use of Notified Body number under RED As I can see from RED 2014/53/EU (article 20.3) and RED Guide (May 2017, chapter 2.6.f), it's only allowed to affix the Notified Body number on the radio product, if Annex IV (Module H) have been applied. I assume that consulting a Notified Body under Annex III (Module B) and get an EU-Type Examination Certificate, does not justify the use of the Notified Body number on the product. Agree? Best regards Amund - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
