HI Amund, It's new under the RED.
Under the R&TTED; any involvement of the Notified Body meant that the number appeared on the label (and packaging, and user manual) Now, with the RED, it's only for this specific case. Thanks, Michael. -----Original Message----- From: Amund Westin [mailto:am...@westin-emission.no] Sent: 13 March 2018 14:15 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] Use of Notified Body number under RED Thanks all! Is this "only NB number under Annex IV Module H" regime new for RED, or was it the same under RTTE? Br. Amund On 2018-03-13 11:23, Michael Derby wrote: > Hello Amund, > > Correct. If you apply to a Notified Body under Annex III (Module B) > and > get an EU-Type Examination Certificate, you do not put their Notified > Body > number on the product. (It would give the false impression that you > had > used Annex IV (Module H). > > If you apply to a Notified Body under Annex III (Module B) and get an > EU-Type Examination Certificate, you list the Notified Body and their > number > on your Declaration of Conformity (DoC). > > Thanks, > > Michael. > > > Michael Derby > Senior Regulatory Engineer > Director > ACB Europe > > Certification Resource for the Wireless Industry > Web: www.acbcert.com > > e-mail: micha...@acbcert.com > Mobile phone: (+44) 7939 880829 (UK area code) > Corporate office phone: USA: (+1) 703 847 4700 > > > > -----Original Message----- > From: Amund Westin [mailto:am...@westin-emission.no] > Sent: 13 March 2018 10:00 > To: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: [PSES] Use of Notified Body number under RED > > As I can see from RED 2014/53/EU (article 20.3) and RED Guide (May > 2017, > chapter 2.6.f), it's only allowed to affix the Notified Body number on > the > radio product, if Annex IV (Module H) have been applied. > I assume that consulting a Notified Body under Annex III (Module B) and > get > an EU-Type Examination Certificate, does not justify the use of the > Notified > Body number on the product. > > Agree? > > Best regards > Amund > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities site > at > http://product-compliance.oc.ieee.org/ can be used for graphics (in > well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. To post a message to the list, send your > e-mail to <emc-p...@ieee.org> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > > Attachments are not permitted but the IEEE PSES Online Communities > site at http://product-compliance.oc.ieee.org/ can be used for > graphics (in well-used formats), large files, etc. > > Website: http://www.ieee-pses.org/ > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org> > > For policy questions, send mail to: > Jim Bacher: <j.bac...@ieee.org> > David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
