Doug, I would think FCC Part 15 Subpart B, Class A is applicable for the rest of the system, some say its exempt, I would go on the side of caution and see if it will me Class A.
Larry K. Stillings Compliance Worldwide, Inc. Test Locally, Sell Globally and Launch Your Products Around the World! FCC - Wireless - Telecom - CE Marking - International Approvals - Product Safety 357 Main Street Sandown, NH 03873 (603) 887 3903 Fax 887-6445 complianceworldwide.com<https://complianceworldwide.com/> Follow us on social media [cid:image001.png@01D8321B.BFE1C620] linkedin.com/company/compliance-worldwide-inc [cid:image002.png@01D8321B.BFE1C620] twitter.com/complianceww Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. From: Doug Nix Sent: Monday, March 07, 2022 12:05 PM To: Larry K. Stillings <la...@complianceworldwide.com> Cc: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: [PSES] FCC Requirements for mobile industrial robots Thanks, Larry. This is helpful. Now, what about the unintentional emissions from the rest of the equipment, i.e., sensors, drives, PC controller, battery charge management system… Remember, this puppy is going into an industrial environment. It’s not a Roomba. 😀 Doug Nix d...@ieee.org<mailto:d...@ieee.org> +1 (519) 729-5704 On 7-Mar-22, at 12:01, Larry K. Stillings <la...@complianceworldwide.com<mailto:la...@complianceworldwide.com>> wrote: Doug, The FCC KDB 996369 D04 provides the best guidance for installing pre-approved radios into hosts. Larry K. Stillings Compliance Worldwide, Inc. Test Locally, Sell Globally and Launch Your Products Around the World! FCC - Wireless - Telecom - CE Marking - International Approvals - Product Safety 357 Main Street Sandown, NH 03873 (603) 887 3903 Fax 887-6445 complianceworldwide.com<https://complianceworldwide.com/> Follow us on social media <image001.png> linkedin.com/company/compliance-worldwide-inc<x-msg://4/linkedin.com/company/compliance-worldwide-inc> <image002.png> twitter.com/complianceww<x-msg://4/twitter.com/complianceww> Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of my firm shall be understood as neither given nor endorsed by it. From: Doug Nix Sent: Monday, March 07, 2022 11:58 AM To: EMC-PSTC@LISTSERV.IEEE.ORG<mailto:EMC-PSTC@LISTSERV.IEEE.ORG> Subject: [PSES] FCC Requirements for mobile industrial robots Colleagues, I am trying to get a handle on the FCC requirements for autonomous mobile industrial robot products. For an example of a similar product, see the 6 River Systems machines: https://6river.com<https://6river.com/>. The WiFi/Bluetooth module used in the product is pre-qualified, so I think that aspect is covered. What I’m concerned about are the rest of the emissions from the onboard electronics/PC/motor drive, etc. Does all of this fall under Part 15, Class B? As far as international requirements are concerned, the devices fall into CISPR 11 / EN 55011 Group 1, for use in a Class A environment. Doug Nix d...@ieee.org<mailto:d...@ieee.org> +1 (519) 729-5704 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> <FCC KDB 996369 D04 Module Integration Guide v01 2-1-2019.pdf> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
