That makes good sense to me, Larry, and confirms my thoughts on this. Doug Nix d...@ieee.org +1 (519) 729-5704
> On 7-Mar-22, at 12:06, Larry K. Stillings <la...@complianceworldwide.com> > wrote: > > Doug, > > I would think FCC Part 15 Subpart B, Class A is applicable for the rest of > the system, some say its exempt, I would go on the side of caution and see if > it will me Class A. > > Larry K. Stillings > Compliance Worldwide, Inc. > Test Locally, Sell Globally and Launch Your Products Around the World! > FCC - Wireless - Telecom - CE Marking - International Approvals - Product > Safety > 357 Main Street > Sandown, NH 03873 > (603) 887 3903 Fax 887-6445 > complianceworldwide.com <https://complianceworldwide.com/> > Follow us on social media > <image001.png> linkedin.com/company/compliance-worldwide-inc > <x-msg://6/linkedin.com/company/compliance-worldwide-inc> <image002.png> > twitter.com/complianceww <x-msg://6/twitter.com/complianceww> > Privileged/Confidential Information may be contained in this message. If you > are not the addressee indicated in this message (or responsible for delivery > of the message to such person), you may not copy or deliver this message to > anyone. In such case, you should destroy this message and kindly notify the > sender by reply email. Please advise immediately if you or your employer do > not consent to Internet email for messages of this kind. Opinions, > conclusions and other information in this message that do not relate to the > official business of my firm shall be understood as neither given nor > endorsed by it. > > From: Doug Nix > Sent: Monday, March 07, 2022 12:05 PM > To: Larry K. Stillings <la...@complianceworldwide.com> > Cc: EMC-PSTC@LISTSERV.IEEE.ORG > Subject: Re: [PSES] FCC Requirements for mobile industrial robots > > Thanks, Larry. This is helpful. > > Now, what about the unintentional emissions from the rest of the equipment, > i.e., sensors, drives, PC controller, battery charge management system… > Remember, this puppy is going into an industrial environment. It’s not a > Roomba. 😀 > > Doug Nix > d...@ieee.org <mailto:d...@ieee.org> > +1 (519) 729-5704 > > > On 7-Mar-22, at 12:01, Larry K. Stillings <la...@complianceworldwide.com > <mailto:la...@complianceworldwide.com>> wrote: > > Doug, > > The FCC KDB 996369 D04 provides the best guidance for installing pre-approved > radios into hosts. > > Larry K. Stillings > Compliance Worldwide, Inc. > Test Locally, Sell Globally and Launch Your Products Around the World! > FCC - Wireless - Telecom - CE Marking - International Approvals - Product > Safety > 357 Main Street > Sandown, NH 03873 > (603) 887 3903 Fax 887-6445 > complianceworldwide.com <https://complianceworldwide.com/> > Follow us on social media > <image001.png> linkedin.com/company/compliance-worldwide-inc > <x-msg://4/linkedin.com/company/compliance-worldwide-inc> <image002.png> > twitter.com/complianceww <x-msg://4/twitter.com/complianceww> > Privileged/Confidential Information may be contained in this message. If you > are not the addressee indicated in this message (or responsible for delivery > of the message to such person), you may not copy or deliver this message to > anyone. In such case, you should destroy this message and kindly notify the > sender by reply email. Please advise immediately if you or your employer do > not consent to Internet email for messages of this kind. Opinions, > conclusions and other information in this message that do not relate to the > official business of my firm shall be understood as neither given nor > endorsed by it. > > From: Doug Nix > Sent: Monday, March 07, 2022 11:58 AM > To: EMC-PSTC@LISTSERV.IEEE.ORG <mailto:EMC-PSTC@LISTSERV.IEEE.ORG> > Subject: [PSES] FCC Requirements for mobile industrial robots > > Colleagues, > > I am trying to get a handle on the FCC requirements for autonomous mobile > industrial robot products. For an example of a similar product, see the 6 > River Systems machines: https://6river.com <https://6river.com/>. > > The WiFi/Bluetooth module used in the product is pre-qualified, so I think > that aspect is covered. What I’m concerned about are the rest of the > emissions from the onboard electronics/PC/motor drive, etc. Does all of this > fall under Part 15, Class B? As far as international requirements are > concerned, the devices fall into CISPR 11 / EN 55011 Group 1, for use in a > Class A environment. > > Doug Nix > d...@ieee.org <mailto:d...@ieee.org> > +1 (519) 729-5704 > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <emc-p...@ieee.org <mailto:emc-p...@ieee.org>> > All emc-pstc postings are archived and searchable on the web at: > http://www.ieee-pses.org/emc-pstc.html > <http://www.ieee-pses.org/emc-pstc.html> > Attachments are not permitted but the IEEE PSES Online Communities site at > http://product-compliance.oc.ieee.org/ > <http://product-compliance.oc.ieee.org/> can be used for graphics (in > well-used formats), large files, etc. > Website: http://www.ieee-pses.org/ <http://www.ieee-pses.org/> > Instructions: http://www.ieee-pses.org/list.html (including how to > unsubscribe) <http://www.ieee-pses.org/list.html> > List rules: http://www.ieee-pses.org/listrules.html > <http://www.ieee-pses.org/listrules.html> > For help, send mail to the list administrators: > Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org>> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org>> > For policy questions, send mail to: > Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org>> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com>> > <FCC KDB 996369 D04 Module Integration Guide v01 2-1-2019.pdf> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
signature.asc
Description: Message signed with OpenPGP
