I am looking for ay suggestions/recommendations for a cabinet that it used in
conjunction with, it not physically or electrically connect to, a product that
falls under the EU Machinery Regulation.
Questions are:
* can/should this cabinet be CE Marked, or should it be considered to be
part pf the CE Marked machine?
* If yes, then the only assessment that I think should be done is a Risk
Assessment, but not sure what standard should be used.
* I suggested 13849 but there is pushback as it it non-electrical, even
though there are sections of 13849 that would be applicable, as well as those
that are N/A
* SEMI S10 is an alternative, but it is a guideline and not a standard, and
is is not harmonized in the EU
I am told that this cabinet is sold as an option to the machine, and therefore
the CE Marking issue.
Thoughts and comments solicited and appreciated.
Steve Brody
[email protected] mailto:[email protected]
C - 603 617 9116
-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
[email protected]
All emc-pstc postings are archived and searchable on the web at:
https://www.mail-archive.com/[email protected]/
Website: https://ewh.ieee.org/soc/pses/
Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to
unsubscribe)
List rules:
https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf
For help, send mail to the list administrators:
Mike Sherman at: [email protected]
Rick Linford at: [email protected]
For policy questions, send mail to:
Jim Bacher: <[email protected]>
_________________________________________________
To unsubscribe from the EMC-PSTC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
