Steve What does this cabinet do? What’s its function.
Best regards Charlie Charlie Blackham Sulis Consultants Limited Tel: +44 (0)7946 624317 Web: https://sulisconsultants.com/ Registered in England and Wales, number 05466247 From: Steve Brody <[email protected]> Sent: 19 June 2025 19:05 To: [email protected] Subject: [PSES] Non-electrical support products I am looking for ay suggestions/recommendations for a cabinet that it used in conjunction with, it not physically or electrically connect to, a product that falls under the EU Machinery Regulation. Questions are: * can/should this cabinet be CE Marked, or should it be considered to be part pf the CE Marked machine? * If yes, then the only assessment that I think should be done is a Risk Assessment, but not sure what standard should be used. * I suggested 13849 but there is pushback as it it non-electrical, even though there are sections of 13849 that would be applicable, as well as those that are N/A * SEMI S10 is an alternative, but it is a guideline and not a standard, and is is not harmonized in the EU I am told that this cabinet is sold as an option to the machine, and therefore the CE Marking issue. Thoughts and comments solicited and appreciated. Steve Brody [email protected]<mailto:[email protected]> C - 603 617 9116 ________________________________ This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected]<mailto:[email protected]> All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/<https://www.mail-archive.com/[email protected]/%20> Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe)<https://ewh.ieee.org/soc/pses/list.html> List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected]<mailto:[email protected]> Rick Linford at: [email protected]<mailto:[email protected]> For policy questions, send mail to: Jim Bacher at: [email protected]<mailto:[email protected]> ________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to [email protected] All emc-pstc postings are archived and searchable on the web at: https://www.mail-archive.com/[email protected]/ Website: https://ewh.ieee.org/soc/pses/ Instructions: https://ewh.ieee.org/soc/pses/list.html (including how to unsubscribe) List rules: https://pses.ieee.org/wp-content/uploads/2024/12/EM-PSTC-List-Rules.pdf For help, send mail to the list administrators: Mike Sherman at: [email protected] Rick Linford at: [email protected] For policy questions, send mail to: Jim Bacher: <[email protected]> _________________________________________________ To unsubscribe from the EMC-PSTC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=EMC-PSTC&A=1
