It doesn't have enough ram-good point. I had thought it had 256, but after you mentioned that I checked and it only has 128.
I'll just pull the hard drive and other useful bits and scrap the rest. I've never been a fan of Compaq anyway. I've got an AMD based motherboard that can support at least 512, so I'll build up a machine based around that. Thanks for your help! Javid ----- Original Message ----- From: "Chris Radek" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Saturday, May 12, 2007 6:38 PM Subject: Re: [Emc-users] Install problem > On Sat, May 12, 2007 at 05:59:23PM -0500, Javid Butler wrote: >> That's what I was afraid of, but was hoping there was some workaround. >> Thanks! > > Maybe it doesn't have enough ram. I think 384 is good, 256 has been > reported as both adequate and not adequate by different folks. > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
