Is this a ROSH compliance issue? On Wed, 2007-05-30 at 10:52 +0200, Christof Klaiber wrote: > Dear all, > > for a project in retrofitting some old lathes, I'd need a > controller-card for the servo drives. As far as I've seen, the 5i20, > which seems to be pretty popular here, is not available over here. Is > anybody having a distributor over here or even in Europe for the Mesa or > another (cheap) card? > > The only cards mentioned here > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?EMC2_Supported_Hardware > which are available over here seem to be the Vigilant cards, but they > are 5 times the price of the Mesa card. > > Anyhow the cards should be well supported by EMC. > > Thanks in advance, > Christof > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
