On Wed, 2007-07-18 at 12:47 -0500, Jon Elson wrote: > Kirk Wallace wrote: > > I need help with tuning my brushed servo setup using HALScope. I have > > done a search on linuxcnc.org but only found this: > > > > "First, you need to fire up Halscope. Start EMC2 from a command window ... snip > on your encoder resolution, you may not be able to get down > quite that far. You've obviously read my now outdated wiki page > on tuning, most of the rest of the info there is valid, just the > graphs look different. I need to do a set of new graphs with > Halscope and revise that page. > > Jon
I recall seeing this page a while back, but I can't seem to find it again. Would you have a link handy? Thanks for the signal updates, I'm on my way out to the shop to work on it (play, really). Kirk Wallace ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users