Hello Gene The rapid velocity set for any axis in the ini file is the max velocity that a properly executed motion command can achieve. Feedrate override greater than 100% does not increase that speed. Commanding rapid for more than one axis at a time will result in greater speed along the diagonal.
There are some issues with g0 for a rotary axis and a few issues between max vel in the trajectory planner and max vel on each axis. Rayh On Tue, 2007-08-21 at 09:18 -0400, Gene Heskett wrote: > On Tuesday 21 August 2007, mgouget wrote: > >Dear All, > > > > > > > >It seems that the speed achieved when jogging is higher than what is > >achieved when using G0. > > > > > > > >Is it by design? And if so, why? > > Correct me if I'm wrong guy's but I believe G0 speed is the 'default" > settings > in the .ini file. > > The maximum jog is I believe of a multiplier that is usually set to something > in the 1.2 area, and effects the range of the feed override slider. > > Jog speed may also be a function of the MAXVEL settings in this file. > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
