On Tuesday 21 August 2007, Ray Henry wrote: >Hello Gene > >The rapid velocity set for any axis in the ini file is the max velocity >that a properly executed motion command can achieve.
Thanks Ray, but I'm not sure if that clarifies it to me. What is that variables name? >Feedrate override >greater than 100% does not increase that speed. I noticed that when testing my new dampers, there was no change in the actual speed above about 125% in the override slider. >Commanding rapid for >more than one axis at a time will result in greater speed along the >diagonal. > >There are some issues with g0 for a rotary axis and a few issues between >max vel in the trajectory planner and max vel on each axis. Yes, I never did get Axis A to work in the simulator last week when I was trying to help Ian Wright. But it seemed as if the displayed position was some random value about 3 digits to the right of the decimal point. Invisible motion, and following errors were all I could get out of it. >Rayh > >On Tue, 2007-08-21 at 09:18 -0400, Gene Heskett wrote: >> On Tuesday 21 August 2007, mgouget wrote: >> >Dear All, >> > >> > >> > >> >It seems that the speed achieved when jogging is higher than what is >> >achieved when using G0. >> > >> > >> > >> >Is it by design? And if so, why? >> >> Correct me if I'm wrong guy's but I believe G0 speed is the 'default" >> settings in the .ini file. >> >> The maximum jog is I believe of a multiplier that is usually set to >> something in the 1.2 area, and effects the range of the feed override >> slider. >> >> Jog speed may also be a function of the MAXVEL settings in this file. > >------------------------------------------------------------------------- >This SF.net email is sponsored by: Splunk Inc. >Still grepping through log files to find problems? Stop. >Now Search log events and configuration files using AJAX and a browser. >Download your FREE copy of Splunk now >> http://get.splunk.com/ >_______________________________________________ >Emc-users mailing list >[email protected] >https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) As the poet said, "Only God can make a tree" -- probably because it's so hard to figure out how to get the bark on. -- Woody Allen ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
