I think I have the same, or at least a very similare model from Minertia.
They are not mounted on a machine yet (will be very soon) but there
shouldn't be any problem.
Regards,
Sven
2007/9/8, John Crane <[EMAIL PROTECTED]>:
>
> Has anyone ever connected EMC to Yaskawa servos? I have a 4 axis
> machine that was designed as a laser solder machine some 15 years ago. The
> servos are a brush type Minertia Motor # UGRMEM-02MAKOE with UTOPI-04OMX
> optical encoder (400 pulses/rev). The controller is FR01RB7-R2M.
> Any info would be appreciated.
>
>
> Reg
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
