Hi Jon,
I asked a long time ago and sent the spec to Vlad and he said it would be
ok. So I hope they will work, but you never know...
Unfortenately it seems that Rutex is a sleeping business nowadays, so I hope
my Rutex board will survive. I rather buy new motors if something wrecks.
2007/9/9, Jon Elson <[EMAIL PROTECTED]>:
>
> Svenne Larsson wrote:
> > I'm planning to use them together with a set of Rutex controllers.
> > Not there yet, but in a very near future I have more to tell. :)
> Oh, there will be lots more to tell, I am afraid. The Minertia
> motors have extremely small inductance, as they are ironless
> rotor motors. I think the circulating triangle wave current
> with the unfiltered Rutex drive will be a problem. It may cause
> excessive heating of the motor, drive or both. You may want to
> consult with Rutex on putting an inductor in series with the
> motor before you even connect it up the first time.
>
> Jon
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users