HI MATT,
MY BIG MISTAKE!
IT ISN'T 600 BUT 60 PULSES IN 75 MILISECONDS
REGARDS,
MIROSLAV

On 11/17/07, Matthew Glenn Shaver <[EMAIL PROTECTED]> wrote:
>
> On Sat, 2007-11-17 at 18:47 +0100, Miroslav Pejic wrote:
> > Hi Alex,
> > I'm about to use emc2 to drive my embroidery multihead machine. But,
> > I'm  not shure about speed. Embroidery machine runs at 400 rpm.That
> > means Emc2 must generate up to 600 pulses in 75 miliseconds, at two
> > independent paralell port lines, and with acceleration and
> > decceleration phases, trapesoidal (or S-curve shape if possible).
> > After this is 75 miliseconds pause for preparing next pulse
> > generation.
> >
> > Question is: is this possible ?
>
> 600 pulses / 75 milliseconds = 8 pulses/millisecond, or 8000 pulses per
> second.
>
> This should be no problem at all!
>
> Matt
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to