On Sat, 2007-11-17 at 18:47 +0100, Miroslav Pejic wrote: > Hi Alex, > I'm about to use emc2 to drive my embroidery multihead machine. But, > I'm not shure about speed. Embroidery machine runs at 400 rpm.That > means Emc2 must generate up to 600 pulses in 75 miliseconds, at two > independent paralell port lines, and with acceleration and > decceleration phases, trapesoidal (or S-curve shape if possible). > After this is 75 miliseconds pause for preparing next pulse > generation. > > Question is: is this possible ?
600 pulses / 75 milliseconds = 8 pulses/millisecond, or 8000 pulses per second. This should be no problem at all! Matt ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
