Hi Matt, I, J and K are not modal as far as I can tell. I get bitten by this one every-once-in-awhile.
Dave On Nov 27, 2007, at 10:58 AM, Matthew Glenn Shaver wrote: > The interpreter manual says that, in a center format arc move (G2 or > G3), only one offset word (I, J, or K, whichever are appropriate to > the > selected plane). Assuming for example that the XY plane is > selected, and > only I is specified in a center format arc move block, what Y axis > offset value (J) will be used? > > The last declared J value? > > Zero? > > Basically, are I, J, and K modal? > > Perplexidly, > Matt > > > > ---------------------------------------------------------------------- > --- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
