Yep! This is what I suspected, but I had to be sure... Thanks a lot for this help! Dave Engvall did some experiments as well and came to the same conclusion.
Matt On Tue, 2007-11-27 at 15:40 -0600, Jeff Epler wrote: > I can see now that the documentation was unclear about this. > I am revising it to add the sentence marked "+": > > I and J are the offsets from the current location (in the X and Y > directions, > respectively) of the center of the circle. > I and J are optional except that at least one of the two must be used. > + If only one is specified, the value of the other is taken as 0. > It is an error if: > ... > and similarly for the other planes. > > Does this clarify emc's behavior for you, or is it still not clear? > > Jeff ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users