This is what came to mind first, but I wonder if some processes could be off-loaded to free up resources for control type stuff? VNC and remote X sessions burn up allot of processing and network bandwidth don't they?
On Fri, 2007-12-07 at 15:20 -0700, Andrew Ayre wrote: > Wouldn't it be easier to use remote desktop type functionality? For > example VNC? > > If the PC that connects to the CNC machine is headless I think there is > vnc4server, which only runs a desktop when you connect via VNC. Not 100% > sure and I haven't tried it. > > Andy > > Kirk Wallace wrote: > > I would like to run AXIS remotely. I wrote some notes: > > > > http://www.wallacecompany.com/machine_shop/EMC2/remote_notes.html > > > > to help me keep things sorted out. I am going to give it a try, but if > > anyone has comments or corrections, please let me know. Thanks. > > > -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending) ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
