Hi Matt,
It seems every time I get ready to do something with EMC I am interrupted. All
set to go to Cabin Fever and my co-driver comes down with the flu. Oh well.
More of a drive my co-driver / retrofit assistant are talking about the EMC
fest in June.
I am considering running Ubuntu 6.06 and EMC2.2.2 on a Gateway E3600 (1.6 GHz
Pentium 4 processor, 128 MB SDRAM, 20GB hard drives) with a Nvidia G-Force 2MX
200 (Part # 6002023). There is no onboard video (no video connector on the
motherboard). Do you know if this Nvidia card will work well with EMC? This
computer has a floppy and cd rom drive plus front and back USB ports. A memory
increase is needed. Otherwise it looks like it should work well. I would run
the DBAN 1.0.6 first to make sure the hard drive is clean then try to load the
Ubuntu and EMC2.
What do you think?
Jim
----- Original Message -----
From: "Matthew Glenn Shaver" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)" <[email protected]>
Sent: Tuesday, January 15, 2008 1:24 AM
Subject: Re: [Emc-users] Cabin Fever Expo and CNC
> On Tue, 2007-12-11 at 13:31 -0500, Ron Ginger wrote:
>
> > Is someone familiar with EMC willing to help me run the machine with it?
>
> I'm vaguely familiar with EMC, I've heard it's really hard to
> install. ;) Anyway, Steve Stallings is pretty darn insistent that I come
> up to Cabin Fever this year, and as I don't think the EMC powered demo
> machine I was going to have there is going to make it, I'll be glad to
> help!
>
> Here's a question:
>
> Internet access at the show? If so, great! If no, let me know and I'll
> be sure to bring all required provisions on disk!
>
> Thanks,
> Matt
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
