Kirk Wallace wrote: > On Thu, 2008-01-31 at 12:54 -0800, Kirk Wallace wrote: > ... snip > >>In thinking about scales again, one thought that came to mind is, EMC >>might make a good CMM (manual or powered). But I guess the real magic is >>in the granite slides, though errors could be mapped out. Which brings >>me back to the issue of accurate standards. >> >>Another thought, is there any value in having an RS-232 connection with >>serial calipers or micrometers? > > > FYI on eBay: > > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290200642943 > > EMC CMM?
Good Gourd! $99 for the machine, $9900 to move it to your shop, and that's if you are pretty close! That thing must weigh 15 tons, maybe a lot more. Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
