Hello, seem you configured for an installed system, but didn't install it. (sudo make install).
The alternative is to use ./configure --enable-run-in-place, then you only have to do (sudo make setuid). Regards, Alex ----- Original Message ----- From: "Depoortere Dries" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, February 04, 2008 2:01 PM Subject: [Emc-users] errors > I've try to configure for simulating without a machine, but here's my > errors: > > Print file information: > RUN_IN_PLACE=no > EMC2_DIR= > EMC2_BIN_DIR=/usr/bin > EMC2_TCL_DIR=/usr/share/emc/tcl > EMC2_SCRIPT_DIR= > EMC2_RTLIB_DIR=/usr/realtime-2.6.15-magma/modules/emc2 > EMC2_CONFIG_DIR= > EMC2_LANG_DIR=/usr/share/emc/tcl/msgs > INIVAR=/usr/bin/inivar > HALCMD=/usr/bin/halcmd > EMC2_EMCSH=/usr/bin/emcsh > EMC2_IOSH=/usr/bin/iosh > EMC2 - 2.2.3 > Machine configuration directory is '/home/dries/emc2/configs/cncdries' > Machine configuration file is 'cncdries.ini' > INIFILE=/home/dries/emc2/configs/cncdries/cncdries.ini > PARAMETER_FILE=emc.var > EMCMOT=motmod > EMCIO=io > TASK=milltask > HALUI= > DISPLAY=axis > NML_FILE=emc.nml > Starting EMC2... > Starting EMC2 server program: emcsvr > Loading Real Time OS, RTAPI, and HAL_LIB modules > Realtime system did not load > Shutting down and cleaning up EMC2... > Killing task emcsvr, PID=9614 > Removing HAL_LIB, RTAPI, and Real Time OS modules > Removing NML shared memory segments > Cleanup done > > Kernel message information: > [17179569.184000] Linux version 2.6.15-29-386 ([EMAIL PROTECTED]) (gcc > version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Mon Sep 24 17:18:25 > UTC 2007 > [17179569.184000] BIOS-provided physical RAM map: > [17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 > (usable) > [17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > [17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 > (reserved) > [17179569.184000] BIOS-e820: 0000000000100000 - 000000001df40000 > (usable) > [17179569.184000] BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI > data) > [17179569.184000] BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI > NVS) > [17179569.184000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 > (reserved) > [17179569.184000] 0MB HIGHMEM available. > [17179569.184000] 479MB LOWMEM available. > [17179569.184000] On node 0 totalpages: 122688 > [17179569.184000] DMA zone: 4096 pages, LIFO batch:0 > [17179569.184000] DMA32 zone: 0 pages, LIFO batch:0 > [17179569.184000] Normal zone: 118592 pages, LIFO batch:31 > [17179569.184000] HighMem zone: 0 pages, LIFO batch:0 > [17179569.184000] DMI 2.3 present. > [17179569.184000] ATI board detected. Disabling timer routing over 8254. > [17179569.184000] ACPI: RSDP (v002 > ACPIAM ) @ 0x000fb550 > [17179569.184000] ACPI: XSDT (v001 A M I OEMXSDT 0x04000408 MSFT > 0x00000097) @ 0x1df40100 > [17179569.184000] ACPI: FADT (v001 A M I OEMFACP 0x04000408 MSFT > 0x00000097) @ 0x1df40200 > [17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x04000408 MSFT > 0x00000097) @ 0x1df40300 > [17179569.184000] ACPI: OEMB (v001 A M I OEMBIOS 0x04000408 MSFT > 0x00000097) @ 0x1df50040 > [17179569.184000] ACPI: DSDT (v001 A0016 A0016000 0x00000000 INTL > 0x20030522) @ 0x00000000 > [17179569.184000] ACPI: PM-Timer IO Port: 0x808 > [17179569.184000] ACPI: Local APIC address 0xfee00000 > [17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [17179569.184000] Processor #0 15:2 APIC version 20 > [17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > [17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] > gsi_base[0]) > [17179569.184000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, > GSI 0-23 > [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl > dfl) > [17179569.184000] ACPI: BIOS IRQ0 pin2 override ignored. > [17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low > level) > [17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs > [17179569.184000] Using ACPI (MADT) for SMP configuration information > [17179569.184000] Allocating PCI resources starting at 20000000 (gap: > 1e000000:e17c0000) > [17179569.184000] Built 1 zonelists > [17179569.184000] Kernel command line: root=/dev/hda5 ro quiet splash > [17179569.184000] mapped APIC to ffffd000 (fee00000) > [17179569.184000] mapped IOAPIC to ffffc000 (fec00000) > [17179569.184000] Initializing CPU#0 > [17179569.184000] PID hash table entries: 2048 (order: 11, 32768 bytes) > [17179569.184000] Detected 2794.028 MHz processor. > [17179569.184000] Using pmtmr for high-res timesource > [17179569.184000] Console: colour VGA+ 80x25 > [17179570.864000] Dentry cache hash table entries: 65536 (order: 6, > 262144 bytes) > [17179570.864000] Inode-cache hash table entries: 32768 (order: 5, > 131072 bytes) > [17179570.876000] Memory: 475956k/490752k available (1977k kernel code, > 14208k reserved, 605k data, 288k init, 0k highmem) > [17179570.876000] Checking if this processor honours the WP bit even in > supervisor mode... Ok. > [17179570.956000] Calibrating delay using timer specific routine.. > 5591.31 BogoMIPS (lpj=11182633) > [17179570.956000] Security Framework v1.0.0 initialized > [17179570.956000] SELinux: Disabled at boot. > [17179570.956000] Mount-cache hash table entries: 512 > [17179570.956000] CPU: After generic identify, caps: bfebfbff 00000000 > 00000000 00000000 00004400 00000000 00000000 > [17179570.956000] CPU: After vendor identify, caps: bfebfbff 00000000 > 00000000 00000000 00004400 00000000 00000000 > [17179570.956000] CPU: Trace cache: 12K uops, L1 D cache: 8K > [17179570.956000] CPU: L2 cache: 512K > [17179570.956000] CPU: After all inits, caps: bfebfbff 00000000 00000000 > 00000080 00004400 00000000 00000000 > [17179570.956000] mtrr: v2.0 (20020519) > [17179570.956000] CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 > [17179570.956000] Enabling fast FPU save and restore... done. > [17179570.956000] Enabling unmasked SIMD FPU exception support... done. > [17179570.956000] Checking 'hlt' instruction... OK. > [17179570.972000] checking if image is initramfs... it is > [17179571.464000] Freeing initrd memory: 6668k freed > [17179571.476000] ACPI: Looking for DSDT ... not found! > [17179571.480000] ENABLING IO-APIC IRQs > [17179571.480000] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 > [17179571.624000] NET: Registered protocol family 16 > [17179571.624000] EISA bus registered > [17179571.624000] ACPI: bus type pci registered > [17179571.624000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last > bus=2 > [17179571.624000] PCI: Using configuration type 1 > [17179571.624000] ACPI: Subsystem revision 20051216 > [17179571.628000] ACPI: Interpreter enabled > [17179571.628000] ACPI: Using IOAPIC for interrupt routing > [17179571.628000] ACPI: PCI Root Bridge [PCI0] (0000:00) > [17179571.628000] PCI: Probing PCI hardware (bus 00) > [17179571.628000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 > [17179571.628000] Boot video device is 0000:01:05.0 > [17179571.628000] PCI: Transparent bridge - 0000:00:14.4 > [17179571.628000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [17179571.632000] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.P0P1._PRT] > [17179571.632000] ACPI: PCI Interrupt Routing Table > [\_SB_.PCI0.P0P2._PRT] > [17179571.632000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 > 12 14 15) > [17179571.632000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 > 12 14 15) > [17179571.636000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 > 12 14 15) > [17179571.636000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 > 12 14 15) > [17179571.636000] Linux Plug and Play Support v0.97 (c) Adam Belay > [17179571.636000] pnp: PnP ACPI init > [17179571.636000] pnp: PnP ACPI: found 11 devices > [17179571.636000] PnPBIOS: Disabled by ACPI PNP > [17179571.636000] PCI: Using ACPI for IRQ routing > [17179571.636000] PCI: If a device doesn't work, try "pci=routeirq". If > it helps, post a report > [17179571.636000] PCI: Cannot allocate resource region 7 of bridge > 0000:00:14.4 > [17179571.636000] PCI: Cannot allocate resource region 0 of device > 0000:02:06.0 > [17179571.648000] pnp: 00:05: ioport range 0x228-0x22f has been reserved > [17179571.648000] PCI: Bridge: 0000:00:01.0 > [17179571.648000] IO window: d000-dfff > [17179571.648000] MEM window: ee800000-eebfffff > [17179571.648000] PREFETCH window: e6700000-ee6fffff > [17179571.648000] PCI: Bridge: 0000:00:14.4 > [17179571.648000] IO window: disabled. > [17179571.648000] MEM window: eec00000-f73fffff > [17179571.648000] PREFETCH window: 20000000-200fffff > [17179571.648000] audit: initializing netlink socket (disabled) > [17179571.648000] audit(1202121380.648:1): initialized > [17179571.648000] VFS: Disk quotas dquot_6.5.1 > [17179571.648000] Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > [17179571.648000] Initializing Cryptographic API > [17179571.648000] io scheduler noop registered > [17179571.648000] io scheduler anticipatory registered > [17179571.648000] io scheduler deadline registered > [17179571.648000] io scheduler cfq registered > [17179571.648000] isapnp: Scanning for PnP cards... > [17179572.000000] isapnp: No Plug & Play device found > [17179572.016000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at > 0x60,0x64 irq 1,12 > [17179572.016000] Failed to disable AUX port, but continuing anyway... > Is this a SiS? > [17179572.016000] If AUX port is really absent please use the > 'i8042.noaux' option. > [17179572.024000] serio: i8042 AUX port at 0x60,0x64 irq 12 > [17179572.028000] serio: i8042 KBD port at 0x60,0x64 irq 1 > [17179572.028000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, > IRQ sharing enabled > [17179572.028000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, > low) -> IRQ 185 > [17179572.028000] ACPI: PCI interrupt for device 0000:00:14.6 disabled > [17179572.028000] RAMDISK driver initialized: 16 RAM disks of 65536K > size 1024 blocksize > [17179572.028000] Uniform Multi-Platform E-IDE driver Revision: > 7.00alpha2 > [17179572.028000] ide: Assuming 33MHz system bus speed for PIO modes; > override with idebus=xx > [17179572.028000] mice: PS/2 mouse device common for all mice > [17179572.032000] EISA: Probing bus 0 at eisa.0 > [17179572.032000] EISA: Detected 0 cards. > [17179572.032000] NET: Registered protocol family 2 > [17179572.056000] input: AT Translated Set 2 keyboard > as /class/input/input0 > [17179572.068000] IP route cache hash table entries: 4096 (order: 2, > 16384 bytes) > [17179572.068000] TCP established hash table entries: 16384 (order: 4, > 65536 bytes) > [17179572.068000] TCP bind hash table entries: 16384 (order: 4, 65536 > bytes) > [17179572.068000] TCP: Hash tables configured (established 16384 bind > 16384) > [17179572.068000] TCP reno registered > [17179572.068000] TCP bic registered > [17179572.068000] NET: Registered protocol family 1 > [17179572.068000] NET: Registered protocol family 8 > [17179572.068000] NET: Registered protocol family 20 > [17179572.068000] Using IPI Shortcut mode > [17179572.068000] ACPI wakeup devices: > [17179572.068000] MC97 P0P2 SLAN USB1 USB2 > [17179572.068000] ACPI: (supports S0 S1 S4 S5) > [17179572.068000] Freeing unused kernel memory: 288k freed > [17179572.112000] vga16fb: initializing > [17179572.112000] vga16fb: mapped to 0xc00a0000 > [17179572.228000] Console: switching to colour frame buffer device 80x25 > [17179572.228000] fb0: VGA16 VGA frame buffer device > [17179573.388000] Capability LSM initialized > [17179573.968000] ATIIXP: IDE controller at PCI slot 0000:00:14.1 > [17179573.968000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, > low) -> IRQ 193 > [17179573.968000] ATIIXP: chipset revision 0 > [17179573.968000] ATIIXP: not 100% native mode: will probe irqs later > [17179573.968000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: > hda:DMA, hdb:pio > [17179573.968000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: > hdc:DMA, hdd:pio > [17179573.968000] Probing IDE interface ide0... > [17179574.256000] hda: ST380011A, ATA DISK drive > [17179574.928000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > [17179574.932000] Probing IDE interface ide1... > [17179575.668000] hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive > [17179576.340000] ide1 at 0x170-0x177,0x376 on irq 15 > [17179576.348000] hda: max request size: 1024KiB > [17179576.356000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, > CHS=16383/255/63, UDMA(100) > [17179576.356000] hda: cache flushes supported > [17179576.356000] hda: hda1 hda2 hda3 < hda5 hda6 > > [17179576.408000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB > Cache, UDMA(33) > [17179576.408000] Uniform CD-ROM driver Revision: 3.20 > [17179576.728000] usbcore: registered new driver usbfs > [17179576.728000] usbcore: registered new driver hub > [17179576.728000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller > (OHCI) Driver (PCI) > [17179576.728000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, > low) -> IRQ 201 > [17179576.728000] ohci_hcd 0000:00:13.0: OHCI Host Controller > [17179576.756000] ohci_hcd 0000:00:13.0: new USB bus registered, > assigned bus number 1 > [17179576.756000] ohci_hcd 0000:00:13.0: irq 201, io mem 0xf7c00000 > [17179576.788000] ieee1394: Initialized config rom entry `ip1394' > [17179576.816000] hub 1-0:1.0: USB hub found > [17179576.816000] hub 1-0:1.0: 3 ports detected > [17179576.920000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, > low) -> IRQ 201 > [17179576.920000] ohci_hcd 0000:00:13.1: OHCI Host Controller > [17179576.944000] ohci_hcd 0000:00:13.1: new USB bus registered, > assigned bus number 2 > [17179576.944000] ohci_hcd 0000:00:13.1: irq 201, io mem 0xf7d00000 > [17179577.004000] hub 2-0:1.0: USB hub found > [17179577.004000] hub 2-0:1.0: 3 ports detected > [17179577.108000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, > low) -> IRQ 201 > [17179577.108000] ehci_hcd 0000:00:13.2: EHCI Host Controller > [17179577.108000] ehci_hcd 0000:00:13.2: new USB bus registered, > assigned bus number 3 > [17179577.108000] ehci_hcd 0000:00:13.2: irq 201, io mem 0xf7e00000 > [17179577.108000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, > driver 10 Dec 2004 > [17179577.108000] hub 3-0:1.0: USB hub found > [17179577.108000] hub 3-0:1.0: 6 ports detected > [17179577.212000] ohci1394: $Rev: 1313 $ Ben Collins > <[EMAIL PROTECTED]> > [17179577.212000] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, > low) -> IRQ 185 > [17179577.212000] PCI: Via IRQ fixup for 0000:02:05.0, from 5 to 9 > [17179577.264000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] > MMIO=[f7300000-f73007ff] Max Packet=[2048] > [17179577.400000] Attempting manual resume > [17179577.432000] EXT3-fs: mounted filesystem with ordered data mode. > [17179577.448000] kjournald starting. Commit interval 5 seconds > [17179577.540000] usb 3-1: new high speed USB device using ehci_hcd and > address 2 > [17179578.648000] ieee1394: Host added: ID:BUS[0-00:1023] > GUID[00e0180000773804] > [17179585.460000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [17179585.460000] shpchp: Standard Hot Plug PCI Controller Driver > version: 0.4 > [17179585.520000] Linux agpgart interface v0.101 (c) Dave Jones > [17179585.544000] agpgart: Detected Ati IGP9100/M chipset > [17179585.552000] agpgart: AGP aperture is 64M @ 0xf8000000 > [17179585.920000] idVendor = 0x2001, idProduct = 0x3c00 > [17179585.920000] INIT bRadio=1 > [17179585.920000] usbcore: registered new driver rtusb > [17179585.952000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 18 (level, > low) -> IRQ 209 > [17179585.952000] 3c59x: Donald Becker and others. > www.scyld.com/network/vortex.html > [17179585.952000] 0000:02:08.0: 3Com PCI 3c920B-EMB-WNM (ATI Radeon 9100 > IGP) at dea0e000. Vers LK1.1.19 > [17179586.172000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, > low) -> IRQ 185 > [17179586.188000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, > low) -> IRQ 185 > [17179586.216000] input: PC Speaker as /class/input/input1 > [17179586.452000] Real Time Clock Driver v1.12 > [17179586.528000] Floppy drive(s): fd0 is 1.44M > [17179586.548000] FDC 0 is a post-1991 82077 > [17179586.732000] input: ImPS/2 Logitech Wheel Mouse > as /class/input/input2 > [17179586.788000] ts: Compaq touchscreen protocol output > [17179587.144000] RT25usb Driver version 1.1.0 > [17179590.228000] lp: driver loaded but no devices found > [17179590.276000] SCSI subsystem initialized > [17179590.292000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]> > [17179590.292000] ieee1394: sbp2: Driver forced to serialize I/O > (serialize_io=1) > [17179590.292000] ieee1394: sbp2: Try serialize_io=0 for better > performance > [17179590.352000] Adding 1228932k swap on /dev/hda6. Priority:-1 > extents:1 across:1228932k > [17179590.532000] EXT3 FS on hda5, internal journal > [17179590.700000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > [17179590.700000] md: bitmap version 4.39 > [17179591.180000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: > [EMAIL PROTECTED] > [17179591.644000] NET: Registered protocol family 17 > [17179592.056000] cdrom: open failed. > [17179592.612000] NTFS driver 2.1.25 [Flags: R/O MODULE]. > [17179592.684000] NTFS volume version 3.1. > [17179592.728000] NTFS volume version 3.1. > [17179598.504000] ACPI: Power Button (FF) [PWRF] > [17179598.504000] ACPI: Power Button (CM) [PWRB] > [17179598.596000] ibm_acpi: ec object not found > [17179598.628000] pcc_acpi: loading... > [17179600.624000] rausb0 (WE) : Driver using old /proc/net/wireless > support, please fix driver ! > [17179604.636000] [drm] Initialized drm 1.0.1 20051102 > [17179604.672000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, > low) -> IRQ 193 > [17179604.672000] [drm] Initialized radeon 1.24.0 20060225 on minor 0 > [17179605.380000] ppdev: user-space parallel port driver > [17179605.752000] agpgart: Found an AGP 3.0 compliant device at > 0000:00:00.0. > [17179605.752000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x > mode > [17179605.752000] agpgart: Putting AGP V3 device at 0000:01:05.0 into 4x > mode > [17179605.816000] apm: BIOS version 1.2 Flags 0x03 (Driver version > 1.16ac) > [17179605.816000] apm: overridden by ACPI. > [17179605.984000] [drm] Setting GART location based on old memory map > [17179605.984000] [drm] Loading R200 Microcode > [17179605.984000] [drm] writeback test succeeded in 1 usecs > [17179606.412000] Bluetooth: Core ver 2.8 > [17179606.416000] NET: Registered protocol family 31 > [17179606.416000] Bluetooth: HCI device and connection manager > initialized > [17179606.416000] Bluetooth: HCI socket layer initialized > [17179606.432000] Bluetooth: L2CAP ver 2.8 > [17179606.432000] Bluetooth: L2CAP socket layer initialized > [17179606.476000] Bluetooth: RFCOMM socket layer initialized > [17179606.476000] Bluetooth: RFCOMM TTY layer initialized > [17179606.476000] Bluetooth: RFCOMM ver 1.7 > [17179608.644000] NET: Registered protocol family 10 > [17179608.644000] lo: Disabled Privacy Extensions > [17179608.644000] IPv6 over IPv4 tunneling driver > [17179619.168000] rausb0: no IPv6 routers present > > Debug file information: > insmod: can't read '/usr/realtime-2.6.15-29-386/modules/rtai_hal.ko': No > such file or directory > 9614 > PID TTY STAT TIME COMMAND > Stopping realtime threads > RTAPI: ERROR: could not open shared memory (errno=2) > HAL: ERROR: rtapi init failed > halcmd: hal_init() failed: -9 > NOTE: 'rtapi' kernel module must be loaded > Unloading hal components > RTAPI: ERROR: could not open shared memory (errno=2) > HAL: ERROR: rtapi init failed > halcmd: hal_init() failed: -9 > NOTE: 'rtapi' kernel module must be loaded > ERROR: Module hal_lib does not exist in /proc/modules > ERROR: Module rtapi does not exist in /proc/modules > ERROR: Module rtai_math does not exist in /proc/modules > ERROR: Module rtai_sem does not exist in /proc/modules > ERROR: Module rtai_shm does not exist in /proc/modules > ERROR: Module rtai_fifos does not exist in /proc/modules > /usr/bin/emc_module_helper: Invalid usage with args: remove rtai_ksched > > Usage: /usr/bin/emc_module_helper insert /path/to/module.ext > [param1=value1 ...] > > where module is one of: > rtai_math > rtai_sem > rtai_shm > rtai_fifos > rtai_up > rtai_lxrt > rtai_hal > rtai_sched > rtai_smi > rtai > rt_mem_mgr > adeos > rtl_time > rtl_sched > rtl_posixio > rtl_fifo > rtl > mbuff > > the path starts with one of: > /lib/modules > /usr/realtime > > and the extension is one of: > .ko > > or the module is in the > directory /usr/realtime-2.6.15-magma/modules/emc2 > > OR > > /usr/bin/emc_module_helper remove module > > where module is one of the modules listed above. > > ERROR: Module rtai_hal does not exist in /proc/modules > > > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
