[EMAIL PROTECTED] wrote: > Based on the latency results (187525) you are not going to be able to run > EMC on that machine. > > I had the same problem. The problem is most likely caused by running an > integrated video interface which > is sharing system RAM. You need to install a video card. Literally any > video card should work. Then re-run the > latency test and you should see a huge reduction in the numbers. Then EMC > will work. > > That is where your problem is. The documentation for EMC states what > latency numbers will work. > > I had the same problem, installed an old video card in my machine, the > latency numbers dropped to very low numbers > and things run fine. Give that a try. > > Jim Combs >
Also, make sure that you don't have any USB flash drives plugged in, my latency goes really high when I have one plugged in. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users