I believe Axis "runs" the entire program at load time. The interpreter does read and interpret ahead, but I don't know how far or what the limits are.
Ken ----- Original Message ----- From: "Andre' Blanchard" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Tuesday, April 22, 2008 9:29 AM Subject: Re: [Emc-users] VFD Interference > At 07:35 AM 4/22/2008, you wrote: >>To the best of my knowledge, there has been no attempt to optimize the >>performance of the interpreter. If there is strong feeling that this might >>be a problem, I suspect that it could be improved significantly. >> >>My general experience with products that have never been optimized is that >>a >>factor of two is generally easy. A factor of five or ten isn't unusual. >> >>Ken > > I thought EMC interpreted the entire G code program as it was loaded and > not in real time when it is running. Which explained why the modal codes > display is only correct at the end of the program run. > > If not why does it take so long to load a program? > If only for the graphics can it be disabled and the plot created as the > program is run? > > __________ > Andre' B. Clear Lake, Wi. > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users