Check this out: http://article.gmane.org/gmane.linux.distributions.emc.user/2385
Regards, Alex On Sun, 2008-05-11 at 10:33 -0400, Greg Michalski wrote: > Ok - what am I missing - how do I force the Axis window to start MAXIMIZED > when I click on the icon created by stepconf when I started my base config > file? There's got to be something - just not familiar enough with X to > figure it out - my Linux knowledge is based more in the command line > environment. In MicroSuck I could solve it easily so I know I must be > missing something because Linux is so broadly configurable. > > Thanks for any replies. > > Greg Michalski > SiegX2 Stepper Configuration - EMC2 2.2.5 - X & Y Complete - Starting Z > mechanical conversion design > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
