On Sun, 2008-06-15 at 06:25 -0600, John Thornton wrote: > An interesting thing I noticed yesterday was that when the Manual tool change > popup window comes up it is not a modal screen and does not block the axcess > to > the main Axis screen. The same should be done to the others and problem > solved. > > Come on it is only 24 volts DC... what size do you wear... > > John
When I took a closer look at my setup, it seems it was the g-code (MSG, ...) popup that blocked the e-stop. I haven't verified this my original config file didn't have the manual tool change bits installed. More testing would be needed to verify this, but I am putting my efforts into a proper hardware e-stop and feed hold button. -- Kirk Wallace (California, USA http://www.wallacecompany.com/machine_shop/ Hardinge HNC/EMC CNC lathe, Bridgeport mill conversion, doing XY now, Zubal lathe conversion pending Craftsman AA 109 restoration Shizuoka ST-N/EMC CNC) ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
