On Sat, 6 Dec 2008, Richard Acosta wrote:
Date: Sat, 06 Dec 2008 03:14:13 -0200 From: Richard Acosta <[EMAIL PROTECTED]> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] EMC 2.2.7 + 7i43 + Ted's sample, and same error than using EMC 2.2.6 + 7i43 + Ted's sample.... What now?El 05/12/2008 07:35 p.m., Peter C. Wallace escribió:On Fri, 5 Dec 2008, Richard Acosta wrote: This may also indicate a inability to communicate with the card. 1. Is the card jumpered for EPP (W4 and W5 both in the 'down' position)Yes.2. Is the card powered properly (all three status LEDS = RED RED YELLOW) Should be on at power-upYes,3. Is your parallel port set for EPP 1.9 mode?Yes,4. What kind of parallel cable do you have? We have done all of our testing with Flat cable.Flat cable, when starting EMC2 lights flash an ready goes on after about 1 or 2sec
Ready? What lights change?There are three status lights on the 7I43: /DONE /INIT (both red) and POWER (Yellow)
Also what type of parallel port do you have, Motherboard or PCI add-on?
------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
