On Thu, 2008-12-18 at 13:05 -0800, Dave Engvall wrote: > Hi, > Finally got brave enough to try something with Synergy solids. > > The easy stuff was done in 2.5 D but the contour in the pic was done > with solids. > > Used a .500 roughing mill to rough and then a 0.500 ball end to > finish plus a bit of cleaning > up with a file and emery cloth. ;-) > > http://imagebin.ca/view/EGO40Lt.html > > http://imagebin.ca/view/dHfREsy.html > > Dave
Even though the part is for an instrument of destruction, that is an impressive creation. Bravo. Could I get you to post a tool path picture? ( for ex. http://www.wallacecompany.com/machine_shop/Synergy/Screenshot-3b.png ) ----------- Kirk http://www.wallacecompany.com/machine_shop/ ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users