Look under /usr/weber/post_formats/EMC2 for the emc2 post files. For starters (npi) check out startup1 and startup2.
I don't use some of the stuff in the startup file(s) My first few lines tends to be: G17G20G40G49G80G90 G0Z0M5 (MSG, LOAD .... TOOL) M0M6T1 with the tool change position in my .ini. BTW - I'm manually changing tools with the dual arm tool changer similar to the one Stuart uses. ;-) But everyone has their preferred way to doing things and that is why it is important to be able to change the post. :-) HTH Dave On Dec 19, 2008, at 2:49 PM, Tom wrote: > Dave Engvall <dengv...@...> writes: > > ... I have thoughts about getting a blog going and if so the > instructions >> for getting the correct contour will be there. >> >> Dave > > > Dave, Thanks for posting that. Based on what you did, I downloaded > the free > trial version of Synergy, and poked around a little. Do you have an > Emc2 > post configuration that you would be willing to share. I assume it > would > be a text file? > > Thanks, > Tom > > > > ---------------------------------------------------------------------- > -------- > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
