Alex That seams to have corrected the problem. Rebooted a couple of times and EMC2 starts the first time now.
Would have a lead on some documentation that would help a newbie set up the I/O for a 5i23 with the 7i33 and 7i37 cards? Donne ----- Original Message ----- From: "Alex Joni" <[email protected]> To: "Enhanced Machine Controller (EMC)" <[email protected]> Sent: Sunday, January 04, 2009 2:52 PM Subject: Re: [Emc-users] EMC startup error > Try removing this symlink: > > from http://www.linuxcnc.org/irc/irc.freenode.net:6667/emc/2008-09-11.txt > 21:27:57 <alex_joni> robh: a temp fix is to remove a symlink : 'sudo rm > /lib/modules/2.6.24-16-rtai/rtai' > > If it makes it work for you, let us know and we'll push a fixed package. > > Regards, > Alex > > ----- Original Message ----- > From: "Donnie Timmons" <[email protected]> > To: "Enhanced Machine Controller (EMC)" <[email protected]> > Sent: Sunday, January 04, 2009 8:08 PM > Subject: Re: [Emc-users] EMC startup error > > > > Alex > > > > This the results You may have something. Question how would we fix it? > > > > > > don...@mill:~$ lsmod > > Module Size Used by > > ipv6 221780 8 > > i915 28416 2 > > drm 73620 3 i915 > > rfcomm 34580 2 > > l2cap 21124 13 rfcomm > > bluetooth 50920 4 rfcomm,l2cap > > ppdev 8580 0 > > iptable_filter 2816 0 > > ip_tables 12232 1 iptable_filter > > x_tables 13700 1 ip_tables > > lp 10636 0 > > parport 33224 2 ppdev,lp > > snd_intel8x0 29596 3 > > snd_ac97_codec 90160 1 snd_intel8x0 > > ac97_bus 1920 1 snd_ac97_codec > > snd_pcm_oss 37920 0 > > snd_mixer_oss 15744 1 snd_pcm_oss > > snd_pcm 65416 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss > > snd_seq_dummy 3844 0 > > snd_seq_oss 30740 0 > > snd_seq_midi 8096 0 > > hm2_pci 9116 0 > > hostmot2 55936 1 hm2_pci > > hal_lib 33304 2 hm2_pci,hostmot2 > > snd_rawmidi 22560 1 snd_seq_midi > > rtapi 33540 3 hm2_pci,hostmot2,hal_lib > > snd_seq_midi_event 6912 2 snd_seq_oss,snd_seq_midi > > rtai_fifos 25760 1 rtapi > > rtai_sem 22016 1 rtapi > > snd_seq 44956 6 > > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > > snd_timer 21252 2 snd_pcm,snd_seq > > snd_seq_device 8076 5 > > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > > psmouse 35728 0 > > rtai_sched 102160 3 rtapi,rtai_fifos,rtai_sem > > snd 48564 17 > > snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy, snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > > serio_raw 6660 0 > > rtai_hal 38180 4 rtapi,rtai_fifos,rtai_sem,rtai_sched > > dcdbas 7584 0 > > soundcore 7108 1 snd > > evdev 10752 1 > > pcspkr 3072 0 > > snd_page_alloc 9992 2 snd_intel8x0,snd_pcm > > i2c_i810 4484 0 > > iTCO_wdt 11296 0 > > iTCO_vendor_support 3716 1 iTCO_wdt > > i2c_algo_bit 5892 1 i2c_i810 > > intel_agp 22804 1 > > agpgart 31024 3 drm,intel_agp > > i2c_core 22032 2 i2c_i810,i2c_algo_bit > > ext3 118920 1 > > jbd 38036 1 ext3 > > mbcache 7808 1 ext3 > > sg 33312 0 > > sr_mod 15396 0 > > cdrom 32796 1 sr_mod > > sd_mod 26640 3 > > ata_piix 15748 2 > > ata_generic 7044 0 > > e1000 110016 0 > > libata 134452 2 ata_piix,ata_generic > > scsi_mod 139988 4 sg,sr_mod,sd_mod,libata > > ehci_hcd 28300 0 > > uhci_hcd 21392 0 > > usbcore 119348 3 ehci_hcd,uhci_hcd > > fuse 43284 3 > > don...@mill:~$ > > > > ----- Original Message ----- > > From: "Alex Joni" <[email protected]> > > To: "Enhanced Machine Controller (EMC)" <[email protected]> > > Sent: Sunday, January 04, 2009 5:40 AM > > Subject: Re: [Emc-users] EMC startup error > > > > > >> I think this is related to the hotplug mechanism. > >> When your PC boots it detects the mesa board, and hotplugs it (loads the > >> driver for it). > >> Can you reboot your PC, and after the fresh boot send us the output from > >> lsmod ? > >> > >> Regards, > >> Alex > >> > >> ----- Original Message ----- > >> From: "Donnie Timmons" <[email protected]> > >> To: "Enhanced Machine Controller (EMC)" <[email protected]> > >> Sent: Sunday, January 04, 2009 6:49 AM > >> Subject: Re: [Emc-users] EMC startup error > >> > >> > >> > :-) > >> > > >> > I found the problem with the encoder. It helps to be switching the wire > >> > to > >> > the right encoder. I over look the fact that axis 0 and 2 are on TB1 > >> > and 1 > >> > and 3 are on TB2. > >> > > >> > Still having the startup problem after a power down in that I have to > >> > start > >> > EMC two times with the first erroring out. After that it will start > >> > ever > >> > time till power down again. > >> > > >> > Donnie > >> > ----- Original Message ----- > >> > From: "Peter C. Wallace" <[email protected]> > >> > To: "Enhanced Machine Controller (EMC)" > >> > <[email protected]> > >> > Sent: Saturday, January 03, 2009 11:51 PM > >> > Subject: Re: [Emc-users] EMC startup error > >> > > >> > > >> >> On Sat, 3 Jan 2009, Donnie Timmons wrote: > >> >> > >> >> > Date: Sat, 3 Jan 2009 22:25:38 -0500 > >> >> > From: Donnie Timmons <[email protected]> > >> >> > Reply-To: "Enhanced Machine Controller (EMC)" > >> >> > <[email protected]> > >> >> > To: "Enhanced Machine Controller (EMC)" > >> > <[email protected]> > >> >> > Subject: Re: [Emc-users] EMC startup error > >> >> > > >> >> > Peter > >> >> > > >> >> > I have TTL encoders so the /A and /B are not used or do I have > >> >> > connect > >> > them > >> >> > to ground? Is there any setting other than the jumps on the 7i33 to > >> >> > set > >> > for > >> >> > TTL > >> >> > >> >> > >> >> Oh ok, for TTL leave the /A and /B inputs unconnected. I would check > >> >> the > >> >> signal levels with a 'scope or DVM though... > >> >> > >> >> Peter Wallace > >> >> > >> >> ------------------------------------------------------------------------- - > >> > ---- > >> >> _______________________________________________ > >> >> Emc-users mailing list > >> >> [email protected] > >> >> https://lists.sourceforge.net/lists/listinfo/emc-users > >> > > >> > > >> > -------------------------------------------------------------------------- ---- > >> > _______________________________________________ > >> > Emc-users mailing list > >> > [email protected] > >> > https://lists.sourceforge.net/lists/listinfo/emc-users > >> > >> > >> ------------------------------------------------------------------------- ------- > >> > >> > >> > >> No virus found in this incoming message. > >> Checked by AVG - http://www.avg.com > >> Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: > >> 03.01.2009 > >> 14:14 > >> > >> > >> ------------------------------------------------------------------------- ----- > >> _______________________________________________ > >> Emc-users mailing list > >> [email protected] > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > -------------------------------------------------------------------------- ---- > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.176 / Virus Database: 270.10.2/1873 - Release Date: 03.01.2009 > 14:14 > > > -------------------------------------------------------------------------- ---- > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
