On Sat, 3 Jan 2009, Donnie Timmons wrote: > Date: Sat, 3 Jan 2009 22:25:38 -0500 > From: Donnie Timmons <dtimm...@etex.net> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] EMC startup error > > Peter > > I have TTL encoders so the /A and /B are not used or do I have connect them > to ground? Is there any setting other than the jumps on the 7i33 to set for > TTL
Oh ok, for TTL leave the /A and /B inputs unconnected. I would check the signal levels with a 'scope or DVM though... Peter Wallace ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users