Thanks for your tip, John!! I'm applying everything you suggested.
I followed your directions and created a directory for emc2-trunk, then
used the CVS repository to download the source. I then recompiled
everything per your example. The only change I made was to append
"--enable-simulator" in the ./configure line. Everything went smoothly.
Your tips relieve the hassle I used to feel every time I had to download
a TAR, etc. in order to end up with a working simulator!
I have two concerns about differences between the simulation compile and
2.2.8 non-simulation pre-compiled package. It may be nothing but I'd
just like confirmation. First, the simulation still recognizes ";" as
the start of a remark, whereas 2.2.8 does not (it recognizes "(" only).
Second, on 2.2.8, I get "2.2.8" on the header line of AXIS, whereas on
the simulator, I do not. Instead, I get "pre-2.3 CVS HEAD" on the
header line.
The reason I bring these two (insignificant) differences up is that they
make me wonder whether my simulation is the same release as my actual
milling program.
Am I worried over nothing?? Thanks!
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
