If the encoder position in hal generally tracks the correct position but gets worse over multiple revolutions, I would look to problems outside the PC. For instance, if the problem is not present when you turn the spindle by hand, then it could be noise from the spindle motor coupled into the encoder lines.
Jeff ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
