Ok, some progress has been made. I can now connect to emcrsh via a telnet session. Help and Get both work
Hello results in a HELLO NAK Get <any command> results an appropriate response. Set <any command> results in SET NAK Enable does not seem to work Shutdown results in SHUTDOWN NAK I am most likely doing something wrong here but I cannot figure out what. Your help and patience is appreciated. John Guenther 'Ye Olde Pen Maker' Sterling, Virginia On Thu, 2009-05-07 at 14:46 -0400, John Guenther wrote: > I have this problem emcrsh with 2.3.0 and the May 2, 2009 emc2-trunk. > - > John Guenther > 'Ye Olde Pen Maker' > Sterling, Virginia > > > On Thu, 2009-05-07 at 20:39 +0300, Alex Joni wrote: > > Are you running latest TRUNK from CVS? > > If so, this might be related to the fact that the nml files are now missing. > > I think I saw Jeff removing the need for a default NML file, but maybe > > emcrsh still needs to get some hardcoded defaults. > > > > Regards, > > Alex > > > > ----- Original Message ----- > > From: "John Guenther" <j.guent...@verizon.net> > > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > > Sent: Thursday, May 07, 2009 6:17 PM > > Subject: Re: [Emc-users] user interface development? > > > > > > > Eric, > > > > > > Thanks, no hurry when ever you get to it. Here is some additional > > > information: > > > > > > j...@john-desktop:~$ halcmd loadusr emcrsh > > > j...@john-desktop:~$ emc/usr_intf/emcrsh.cc 2767: can't connect to emc > > > > > > j...@john-desktop:~$ > > > > > > it takes about 10 seconds on this machine for the error message to come > > > up. > > > - > > > John Guenther > > > 'Ye Olde Pen Maker' > > > Sterling, Virginia > > > > > > > > > On Thu, 2009-05-07 at 10:44 -0400, Eric H. Johnson wrote: > > >> John, > > >> > > >> Does the error message come up right away, or do you get a chance to > > >> enter > > >> anything? You should be able to type 'help' after getting: > > >> Connected to localhost. > > >> Escape character is '^]'. > > >> > > >> I am also running 2.3.0 on Hardy, so I know that it works for that > > >> configuration. I will not be able to test until this evening, but I will > > >> see > > >> if I can reproduce what you are getting. > > >> > > >> Regards, > > >> Eric > > >> > > >> > > >> That did not help either, here is what I got: > > >> > > >> j...@john-desktop:~$ halcmd loadusr emcrsh j...@john-desktop:~$ telnet > > >> localhost 5007 Trying 127.0.0.1... > > >> Connected to localhost. > > >> Escape character is '^]'. > > >> emc/usr_intf/emcrsh.cc 2767: can't connect to emc Connection closed by > > >> foreign host. > > >> j...@john-desktop:~$ > > >> > > >> > > >> ------------------------------------------------------------------------------ > > >> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > > >> production scanning environment may not be a perfect world - but thanks > > >> to > > >> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > > >> i700 > > >> Series Scanner you'll get full speed at 300 dpi even with all image > > >> processing features enabled. http://p.sf.net/sfu/kodak-com > > >> _______________________________________________ > > >> Emc-users mailing list > > >> Emc-users@lists.sourceforge.net > > >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > ------------------------------------------------------------------------------ > > > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > > > production scanning environment may not be a perfect world - but thanks to > > > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > > > i700 > > > Series Scanner you'll get full speed at 300 dpi even with all image > > > processing features enabled. http://p.sf.net/sfu/kodak-com > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -------------------------------------------------------------------------------- > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 8.5.325 / Virus Database: 270.12.20/2100 - Release Date: 05/06/09 > > 06:04:00 > > > > > > ------------------------------------------------------------------------------ > > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > > production scanning environment may not be a perfect world - but thanks to > > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > > i700 > > Series Scanner you'll get full speed at 300 dpi even with all image > > processing features enabled. http://p.sf.net/sfu/kodak-com > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users