> > > One of the reasons I need the controller is because my Shizuoka's > steppers run fine on the software generated signals, but I need a fast > PWM to run the changer motor. I haven't found the specs for the PWM > feature yet. Can I assume that I can get above 20kHz? The rest of the > features will be fluff. > > Do you have any pictures of your machine? The design of the changer will > need to follow your setup, which I don't think lends itself well to > generic tutorials. > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA >
Hmm... your comment irritates my eyes (just the eyes). It's a little bit like saying "EMC only suits routers". My idea will be "interchangeable", not to an unlimit level of course but it will be enough so it will fit a bunch of machine types. I have a router and my friend has a Bridgeport style machine and we will make one for each machine. And after all, if you get something to base your own project on no matter what it is, it becomes a lot easier to customize an existing solution to fit your needs than start from the beginning.The prob --S ------------------------------------------------------------------------------ OpenSolaris 2009.06 is a cutting edge operating system for enterprises looking to deploy the next generation of Solaris that includes the latest innovations from Sun and the OpenSource community. Download a copy and enjoy capabilities such as Networking, Storage and Virtualization. Go to: http://p.sf.net/sfu/opensolaris-get _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
