sani.broy...@free.fr wrote: >It doesn't work at all, despite I followed the procedure line by line. > > What does not work?
You need to tell us step by step what you are doing, what you expect to see, and what you actually see. >Pins are not named the same, > Then change the names of the pins on the lines that connect the pins to signals. There is no guarantee that the two devices are the same, even if they look identical. >hal_joystick or hal input doesn't work > How don't they work? You said above that the pin names aren't the same - that tells me that the driver is working, but you see something you don't expect. >despite >this joypad is the same as pictured and is perfectely used by all probe progs >using /dev/input/js0. > > What probe programs? >I can't believe you when you say It worked "out of the wiki", sorry. > > This is rude. Obviously, what's in the wiki worked for someone, so it may also work for others. The fact that it doesn't work for you does not mean that it can't work for anyone else. Note also that you are using 6.06, which may be a critical difference. - Steve ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users