> > Given this is a hobby machine, the 5TPI while sexy could lead to this > type of thing. I use 10TPI on a 2'X4' work surface and can get 120IPM but > stick to 90ipm due to slop in my machine. If your carving out templates > from large sheets of 1/4" MDF or the like, then 5tpi is the way to go, > otherwise, its an accuracy and speed versus actual needs. >
Good luck. ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
