2009/11/8 Steve Blackmore <st...@pilotltd.net> > On Sat, 07 Nov 2009 12:40:36 -0600, you wrote: > > >Just wondering if the G0 speed can be faster then the max feed rate speed. > >On all CNC machines I have run (that use Fanuc, Mit, etc controls) > >the rapid speed was much faster then the max feed rate speed, like 2 > >or 3 times. > > Yes, that's normal? > > Same on Fanuc as EMC, the G0 speed is the rapid speed (usually non > operator definable). The programmed feed speed is G1 and the rate can be > anything up to that defined for G0. > > > Steve Blackmore >
If the G0 speed is higher than max G1 feed rate, wouldn't that mean that your machine can handle higher speeds than configured? ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users