The traced route might not be exactly the cut route because of delays in updating the screen. The display is not updated in real time AFAIK. I have noticed that when doing very small work with G61 or G61.1 which are the same.
John On 10 Nov 2009 at 9:10, Frank Tkalcevic wrote: > In my lathe configuration, I have... > > RS274NGC_STARTUP_CODE = G18 G7 G61.1 > > in the [RS274NGC] section of the ini file. > > Even though on the MDI panel G61.1 is shown to be an active G-Code, > the > route traced is cutting corners. I need to explicitly put G61.1 in > my Gcode > program for it to work. > > Is this a bug, or my misunderstanding of how this works? > > Thanks, > Frank > > > -------------------------------------------------------------------- > ---------- > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 > 30-Day > trial. Simplify your report design, integration and deployment - and > focus on > what you do best, core application coding. Discover what's new > with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
