Mark Wendt (Contractor) wrote: > Dave, > > Thanks for the suggestions. Problem with the board the way > it is, is the DB25 connectors are on opposite sides of the board. A > much better design would have had the DB 25 connectors mounted on the > same side, so that you or I could mount the board to the control box > case, and have the cables from both the computer and the MPG connect > to the board from outside the control box. As it is, there's > practically no easy way to mount the damn thing and make for a clean > cable hookup. Here's a picture of the thing: > > <http://www.cnc4pc.com/Store/osc/product_info.php?cPath=40&products_id=159> > Those connectors could be replaced with straight PCB-mount connectors, preferably the ones with long, or wire-wrap pins, to clear the rest of the parts on the board.
Jon ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
