On Wed, 6 Oct 2010, Don Stanley wrote:
> Date: Wed, 6 Oct 2010 12:37:09 -0400
> From: Don Stanley <dstanley1...@gmail.com>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: mark.we...@nrl.navy.mil,
> "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] My New D519MO Motherboard does not load EMC 10.04.
>
> Thank All;
> The following are the results of lspci and lspci -v respectively.
> The current printer CMOS setting is ECP.
> Does anyone see a printer port?
Pretty sure Pico Systems cards use EPP interface not ECP so I'd try that. The
BIOS should give you the base address. Dont think lspci will list the
parallel port as its not a PCI device on the D510 (it a LPC device I think)
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
Beautiful is writing same markup. Internet Explorer 9 supports
standards for HTML5, CSS3, SVG 1.1, ECMAScript5, and DOM L2 & L3.
Spend less time writing and rewriting code and more time creating great
experiences on the web. Be a part of the beta today.
http://p.sf.net/sfu/beautyoftheweb
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
