On 17 February 2011 17:26, Doug <d...@archfitters.com> wrote: > I have a new PMDX Gecko driver board. It requires an osculating +5 to 0 to > enable the outputs.
I learned many years ago that osculating 5V hurts. :-) > I am using the step wizard and find that I only get a > solid voltage out of pin 17 when I choose charge pump in the wizard. Have a look in the HAL file to see what stepconf has created, You ought to see the charge pump be loaded (loadrt charge_pump), added to a realtime thread (addf charge-pump base-thread) and then linked to the parport pin (net pin-name charge-pump.out parport.0.pin-17-out ) It is possible that the net command might be split onto two lines in different parts of the file. -- atp "Torque wrenches are for the obedience of fools and the guidance of wise men" ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
