A common Mesa setup is a 5i20 + 7i33TA + 7i37TA. I've used that for two conversions so far. The 5i20 plugs into your pci slot and the daughter cards use a 50 pin ribbon cable. The 7i33TA is a quad analog servo interface and the 7i37TA is an I/O card. you can have up to three daughter cards with a 5i20.
John Robert Pabon @ Corse USA wrote: > I have thought about the Mesa cards, but I honestly don't know what all I > would need to buy or what I would need to configure one. I haven't really > found a resource that outlines the process for using a mesa card in the > applications. > So what does the collective wisdom have to offer? What are my options in > terms of motion control. Affordability is a high priority, but performance is > also important. I am willing to put up with some learning curve, but I don't > want to forge new ground completely since I don't have the skillset to > support that. > Thanks, > Rob > > ------------------------------------------------------------------------------ > Fulfilling the Lean Software Promise > Lean software platforms are now widely adopted and the benefits have been > demonstrated beyond question. Learn why your peers are replacing JEE > containers with lightweight application servers - and what you can gain > from the move. http://p.sf.net/sfu/vmware-sfemails > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Fulfilling the Lean Software Promise Lean software platforms are now widely adopted and the benefits have been demonstrated beyond question. Learn why your peers are replacing JEE containers with lightweight application servers - and what you can gain from the move. http://p.sf.net/sfu/vmware-sfemails _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users