Hello EMC users, I am new to this issue (have been lurking for a while) but now plunged into the reality of having to (or wanting to) implement a EMC based system, as the Torchmate Plasma Stepper Controller we had was stolen by unqualified hand...
I am wondering if this type of kit will work with the EMC software? http://cgi.ebay.com/4Axis-Nema-23-Stepper-Motor-425oz-in-CNC-Mill-Control-/140572552311?_trksid=p4340.m185&_trkparms=algo%3DSIC.OPJS%26its%3DI%26itu%3DUA%26otn%3D5%26pmod%3D140580740359%26ps%3D63%26clkid%3D1714182468467345141#ht_3275wt_1139 I'm not related to this seller, nor trying to promote their product, I'm open to hear about better matches or whatever else I should consider! The nice thing is that for what we have been quoted to replace the stolen hardware from torchmate alone we can more than replace the hardware, we can also greatly expand the capabilities of the table for example : -THC (torch height control) -4th axis for cutting pipes -Sheetcam software -flexibility of open source -ability to set up other tools (routers) -learning something new! Thanks for any responses! P.S.: I was going to attach a file describing this seller parallel port module, but apparently the list is not configured for that! ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users