Thanks cogoman and Roland for replying, yes indeed that is a quite important explanation why they use such a ridicoluously low voltage high curent motor (even though they use very thin wires) Torchmate kit came with a 5V 7A motor with 6 wires each! I wonder what kind of circuit model uses 6 wires? How many phases might this motor have? Also just thinking about it now, isn't the real concern the positive capability to move the sleds to the position and never to miss a step? What if I rather focused on the smart move to close the loop (put a digital readout on each motor) and this way make sure that i only go as fast as i can positively accelerate the sleds???
Thanks again for all your help! On Sun, Jul 31, 2011 at 1:01 AM, Roland Jollivet <[email protected]>wrote: > The stepper resistance looks a bit high at 2.1ohm/phase. You wont get much > speed on the supplied 24V psu. > > Regards > Roland > > > > On 31 July 2011 08:32, Tobias Gogolin <[email protected]> wrote: > > > Hello EMC users, I am new to this issue (have been lurking for a while) > but > > now plunged into the reality of having to (or wanting to) implement a EMC > > based system, as the Torchmate Plasma Stepper Controller we had was > stolen > > by unqualified hand... > > > > I am wondering if this type of kit will work with the EMC software? > > > > > http://cgi.ebay.com/4Axis-Nema-23-Stepper-Motor-425oz-in-CNC-Mill-Control-/140572552311?_trksid=p4340.m185&_trkparms=algo%3DSIC.OPJS%26its%3DI%26itu%3DUA%26otn%3D5%26pmod%3D140580740359%26ps%3D63%26clkid%3D1714182468467345141#ht_3275wt_1139 > > > > I'm not related to this seller, nor trying to promote their product, I'm > > open to hear about better matches or whatever else I should consider! The > > nice thing is that for what we have been quoted to replace the stolen > > hardware from torchmate alone we can more than replace the hardware, we > can > > also greatly expand the capabilities of the table for example : > > -THC (torch height control) > > -4th axis for cutting pipes > > -Sheetcam software > > -flexibility of open source > > -ability to set up other tools (routers) > > -learning something new! > > > > Thanks for any responses! > > > > P.S.: I was going to attach a file describing this seller parallel port > > module, but apparently the list is not configured for that! > > > > > ------------------------------------------------------------------------------ > > Got Input? Slashdot Needs You. > > Take our quick survey online. Come on, we don't ask for help often. > > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > > http://p.sf.net/sfu/slashdot-survey > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Tobias Gogolin Tel. Movistar (646) 124 32 82 Tel. Telcel (646) 160 58 99 skype: moontogo messenger: [email protected] First Bitcoin Account: 1LCupcVd8HhAGyVhd3xayPpnQHeis7rAiV Blog: http://zeitgeistensenada.blogspot.com/ You develop Sustainable Ranch Technology at http://tech.groups.yahoo.com/group/SURA-TECH an Open Source Electric Motor/Alternator at http://groups.yahoo.com/group/Performance_Axial_Flux and an Open Source Motor Controller at http://groups.yahoo.com/group/GoBox ------------------------------------------------------------------------------ uberSVN's rich system and user administration capabilities and model configuration take the hassle out of deploying and managing Subversion and the tools developers use with it. Learn more about uberSVN and get a free download at: http://p.sf.net/sfu/wandisco-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
