The stepper resistance looks a bit high at 2.1ohm/phase. You wont get much speed on the supplied 24V psu.
Regards Roland On 31 July 2011 08:32, Tobias Gogolin <usert...@gmail.com> wrote: > Hello EMC users, I am new to this issue (have been lurking for a while) but > now plunged into the reality of having to (or wanting to) implement a EMC > based system, as the Torchmate Plasma Stepper Controller we had was stolen > by unqualified hand... > > I am wondering if this type of kit will work with the EMC software? > > http://cgi.ebay.com/4Axis-Nema-23-Stepper-Motor-425oz-in-CNC-Mill-Control-/140572552311?_trksid=p4340.m185&_trkparms=algo%3DSIC.OPJS%26its%3DI%26itu%3DUA%26otn%3D5%26pmod%3D140580740359%26ps%3D63%26clkid%3D1714182468467345141#ht_3275wt_1139 > > I'm not related to this seller, nor trying to promote their product, I'm > open to hear about better matches or whatever else I should consider! The > nice thing is that for what we have been quoted to replace the stolen > hardware from torchmate alone we can more than replace the hardware, we can > also greatly expand the capabilities of the table for example : > -THC (torch height control) > -4th axis for cutting pipes > -Sheetcam software > -flexibility of open source > -ability to set up other tools (routers) > -learning something new! > > Thanks for any responses! > > P.S.: I was going to attach a file describing this seller parallel port > module, but apparently the list is not configured for that! > > ------------------------------------------------------------------------------ > Got Input? Slashdot Needs You. > Take our quick survey online. Come on, we don't ask for help often. > Plus, you'll get a chance to win $100 to spend on ThinkGeek. > http://p.sf.net/sfu/slashdot-survey > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
