On Thu, 2011-08-04 at 21:59 -0700, Kirk Wallace wrote: ... snip > Also, the linux parallel port and printer drivers, if loaded, will > reserve the I/O address blocks for printing and (may) keep EMC2 from > using them. "lsmod" should list the loaded modules. Look for ppdev, pp, > and parport_pc and unload them if needed (again, see above link).
Another thing, this page: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Startech has a C program that allows one to check or set the port mode to EPP or Standard SPP. Setting a NetMos or Moschip card to EPP with this will allow ECM2 to (sort of) use the port with FPGA signal generators, but the port's firmware or hardware signal timing is messed up and will most likely crash the system. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos & much more. Register early & save! http://p.sf.net/sfu/rim-blackberry-1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
