Hi Dave: Tnx for reply.
The transmission I just took apart had them in it on tapered roller bearings with snap ring, that was out of a Honda 4x4. I assumed that they were for pre-load. Don't have room in my spindle assembly for th'd nut. Bill On Thu, 25 Aug 2011 17:46:37 +0100 Dave Caroline <[email protected]> wrote: > wavy washers are used for end float control for normal bearing, not > seen them used for taper roller > > Dave Caroline > > On Thu, Aug 25, 2011 at 5:24 PM, Cathrine Hribar <[email protected]> >wrote: >> >> >> Hi: >> >> Was wondering if you, or anyone on here has a source for wavy spring >>washers? >> The ones used to load taper roller bearings. >> >> I called my local bearing house here and he don't know what I am talking >> about!!! >> >> Thanks: >> >> Bill >> >> ------------------------------------------------------------------------------ >> EMC VNX: the world's simplest storage, starting under $10K >> The only unified storage solution that offers unified management >> Up to 160% more powerful than alternatives and 25% more efficient. >> Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ > EMC VNX: the world's simplest storage, starting under $10K > The only unified storage solution that offers unified management > Up to 160% more powerful than alternatives and 25% more efficient. > Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ EMC VNX: the world's simplest storage, starting under $10K The only unified storage solution that offers unified management Up to 160% more powerful than alternatives and 25% more efficient. Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
