On Thu, 2011-08-18 at 08:32 -0700, [email protected] wrote: > Sorry about any confusion. I am going to retain the motors. I am > planning on upgrading the resolver/ tac gen setup with encoders. I > was actually have built some of the UHU HP boards but recent testing > has been given poor results @ operating voltages (160v). They showed > promise @ 100v but when setup to 160v some of the traces on the boards > fried. I would prefer an off the shelf component that is dependable > and more reliable for this installation. So I am curious what other > peoples suggestions are. ... snip
I replaced my HNC resolvers and tachs with encoders: http://www.wallacecompany.com/cnc_lathe/HNC/ and used Jon's amps: http://pico-systems.com/pwmservo.html I'm running at 100 Volts, but the amps are rated for 160 Volts. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Get a FREE DOWNLOAD! and learn more about uberSVN rich system, user administration capabilities and model configuration. Take the hassle out of deploying and managing Subversion and the tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
