2011/11/26 Dave <e...@dc9.tzo.com>: > Yes, EMC2 is installed, I have the 7i43 attached with a Mesa EPP ribbon cable > and all is well so far. > > But I did see that exact same error message along the way.. as I forgot to > hook up the 5v to the card at one point. > > I also saw that error as I was setting up EMC2. I forget what I did wrong, > but I loaded the standard demo app and a realized that I had done something > else wrong and I corrected it. However I do not recall what I corrected. > Something in the EMC2 setup files - ini or hal, etc.
It does not make much sense to me, but I will try to recheck the power supply. Is there anything else I can do to identify the problem? It is not D525-specific issue, because now I have hdd and 7i43 attached to Gigabyte GA-K8N51GMF-9 board with some AMD cpu. BTW, I am now thinking of "plan B", because I expect that I will not fix the problem and definitely will not get any other (probably, pci based) solution in time. So I have a question - what happens, if I will connect 7i37 pins directly to LPT pins? Inputs to lpt input pins and output drivers to output pins respectively. Viesturs ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-novd2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
